Description

Bostik EzPoxy EzClean is a 100% Solids Epoxy Mortar & Grout with outstanding application and clean-up properties. Use with ceramic, quarry, porcelain, granite, slate, pre-cast terazzo, dimensional and moisture sensitive stone tiles over properly prepared concrete, structurally sound, exterior grade plywood (interior/dry use only), cement backer board, Bostik GoldPlus, Ultra-Set Advanced, Black-Top and existing ceramic tile.

14 LB KIT COVERAGE CHART (FT2)

Tile Size Grout Joint Size
——– 1/16″ 1/8″ 3/16″ 3/8″ 1/2″
1″x1″x1/4″ 48 24 12 8 6
2″x1″x1/4″ 64 32 16 10 8
2″x2″x1/4″ 96 48 24 16 12
3″x3″x1/4″ 152 76 38 25 19
4″x4″x1/4″ 200 100 50 33 25
4″x4″x3/8″ 136 68 34 22 17
4″x4″x1/2″ 96 48 24 16 12
4″x8″x3/8″ 176 88 44 29 22
4″x8″x1/2″ 136 68 34 22 17
4″x8″x1-3/8″ 48 24 12 8 6
6″x6″x3/8″ 200 100 50 33 25
6″x6″x1/2″ 152 76 38 25 19
6″x6″x3/4″ 96 48 24 16 12
8″x8″x1/4″ 408 204 102 68 51
8″x8″x3/8″ 272 136 68 45 34
8″x8″x1/2″ 200 100 50 33 25
10″x10″x3/8″ 336 168 84 56 42
12″x12″x1/4″ 616 308 154 102 77
12″x12″x3/8″ 408 204 102 68 51
12″x12″x1/2″ 304 152 76 50 38

Application

Mortar: Apply a thin coat of EzPoxy EzClean to the substrate with the flat edge of the trowel. Apply additional mortar with the appropriate notched trowel. Apply mortar to an area no greater than can be tiled in 20 to 30 minutes. Apply tile using a twisting motion into a fresh bed of mortar to ensure maximum contact and bond. Periodically check back of tile to ensure proper transfer. If any evidence of setting occurs, remove and reapply. A finished mortar bed thickness of 3/32″ to 1/8″ is required.

For more information on Installation see these links:

Showing all 27 results