Bostik Tile-Mate Floor & Wall Thin Set Mortar Gray G00762-26ASKU: G00762-26A
- For Interior and Exterior use on vertical and horizontal surfaces
- Exceeds ANSI A118.1 when mixed with water
- Exceeds ANSI A118.4 and A118.11 when mixed with Bostik 425 Multi-Purpose Acrylic Admixture
Bostik Tile-Mate Floor & Wall Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain*, granite, slate, marble, limestone, and dimensional stone tiles. Use over properly prepared concrete; structurally-sound, exterior grade plywood* (interior/dry use only); cementitious backer board; Bostik Ultra-Set Advanced*, Bostik Black-Top*, Bostik GoldPlus* and existing, well-bonded vinyl/VCT* or ceramic tile*.
*Mix Tile Mate Floor & Wall with Bostik 425™ Multi-Purpose Acrylic Latex Admixture.
Apply a thin coat of Bostik Tile-Mate Floor & Wall with the flat edge of trowel to achieve a good mechanical bond to the substrate. Comb additional mortar with the appropriate size notched trowel. If any evidence of skinning or setting occurs, remove and re-apply fresh mortar. Apply mortar to an area no greater than can be tiled in 20 to 30 minutes. Apply tile using a twisting motion into a fresh bed of mortar to ensure maximum contact and bond. Periodically check back of tile to ensure proper transfer (interior applications—minimum 80% coverage; exterior, wet, or plywood applications—minimum 95% coverage). Temperatures must be between 50°F (10°C)-100°F (37.8°C) during installation.